the top position. If the brake line pulley is pushed down, the main brake lines should be
lengthened by the same distance.
Higher hang points require longer brake lines, lower hang points, need shorter settings.
Fig. 17: Variable brake pulley
Wing tip brake adjustment
The wing tip brake is delivered ex factory adjusted to the main brake line setting. You should
adjust the length of the wing tip brake by the same amount that you alter the length of the main
brake line.
An elastic rope allows you to grip the wing tip brake easily together with the main brake
handle. The rope is attached to the D-riser with a slider. This allows the length/position of the
wing tip brake to be changed.
To Next Page
Loading...
