GIRBAU LOGI CONTROL User Manual

LOGI CONTROL. Advanced mode 43
Cod. 523340
Rev. 10/1016
Dispenser cleaning
CAUTION!
DO NOT ACTIVATE THIS OPTION IN MACHINES CONNECTED TO EXTERNAL DOSING
INSTALLATIONS.
This option activates the cleaning of the dispenser liquid product compartments by opening their water filling
valves to eliminate the possible remaining products.
OPTIONS
MEANING
dc-0
Dispenser cleaning NO activated
dc-1
Dispenser cleaning YES activated
The ▲/▼ keys allow the user to modify the option displayed.
The key validates the selection on the display and allows the user to access the following programmable
function.
Program acceleration
Program acceleration can reduce the time of the programs accessing functions or subsequent phases, or
reducing the times of rotation and spinning. There is also the possibility of increasing the rotation times.
The AC option enables or disables the use of the ACCEL (acceleration) key.
OPTIONS
MEANING
AC-0
Acceleration option disabled
AC-1
Acceleration option enabled
The ▲key allows the user to modify the option displayed.
The key validates the selection on the display and allows the user to access the following programmable
function.
Suds prevention program
(EH020 models only.)
Certain detergents commonly used in some countries produce large quantities of suds and can complicate the
proper functioning of the wash programs.
To reduce this problem it is advisable to activate the suds prevention option (SP-I). This option modifies the
contents of the programmes (see Section 5.3) by increasing rinsing efficiency.
CAUTION!
THE USE OF SOAP CHEMICALS WITH SUDS CONTROL IS RECOMMENDED. DO NOT EXCEED THE
RECOMMENDED DOSAGE.
OPTIONS
MEANING
SP-0
Without suds prevention
SP-1
Suds prevention option enabled
The ▲ key allows the user to modify the option displayed.
The key validates the selection on the display and allows the user to access the following programmable
function.

GIRBAU LOGI CONTROL Specifications

General

Brand	GIRBAU
Model	LOGI CONTROL
Category	Controller
Language	English