GIRBAU LOGI CONTROL User Manual

LOGI PRO. Advanced mode 66
Cod. 523340
Rev. 10/1016
Bath drain
The emptying of the washing machine bath involves activating the draining system, and the selection of a drum
rotation speed.
Option E-1 implies an unchangeable time value. The duration of options E-2...E-6 is programmable within a
determined range.
MEANING
R.P.M. (G FORCE) FOLLOWING MACHINE MODEL
HS-6008
EH020
RMS610
REM025
RMG613
RMG033
RMG617
RMG040
RMG623
RMG055
RMG628
RMG070
E-0
Without draining
Access to the next phase
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
E-1
Drain + wash speed
50
50
44
47
47
45
E-2
Drain + positioning speed
100
100
100
100
100
100
E-3
Drain + low extract speed
400(50)
400(50)
380(50)
380(50)
360(50)
342(50)
E-4
Drain + medium spin
speed
600(110)
500(75)
540(100)
580(100)
505(100)
485100)
E-5
Drain + medium/high
extract speed
800(190)
580(100)
635(140)
635(140)
600(140)
570(140)
E-6
Drain + high spin speed
970(280)
600(108)
760(200)
760(200)
715(200)
685(200)
The ▲/▼ keys allow the user to modify the option displayed.
The key validates the selection on the display and allows the user to access the following programmable
function.
Spin time
Extract time programmed in the phase. Time in minutes.
OPTIONS
MEANING
n.p.
Draining time E-1 not programmable
2 ... 9
Programmable values
The ▲/▼ keys allow the user to modify the option displayed.
The key validates the displayed selection and ends the phase programming.
The display will show the following phase.
When finalising the programming of the last phase of the program, the display shows Pr-* (modified program).
The ▲/▼ keys allow the user to select another program in the PROGRAMMING menu.

GIRBAU LOGI CONTROL Specifications

General

Brand	GIRBAU
Model	LOGI CONTROL
Category	Controller
Language	English