GIRBAU LOGI CONTROL User Manual

LOGI PRO. Advanced mode 65
Cod. 523340
Rev. 10/1016
Rotation sequence
The mechanical action of the washing machine on the linen is different depending on the rotation sequence
selected.
OPTIONS
ROTATION
SEQUENCE
REVERSE
R.P.M. FOLLOWING MACHINE MODEL
HS-6008
RMS610
EH020
REM025
RMG613/17
RMG033/040
RMG623
RMG055
RMG628
RMG070
no
No rotation in
the phase
- - - - -
- - - -
- - - -
- - - -
- - - -
Lo
Low
ON: 5 sec.
OFF: 25 sec.
25
30
30
20
Md
Normal
ON: 15 sec.
OFF: 15 sec.
35
37
37
36
Hi
High
ON: 25 sec.
OFF: 5 sec.
50
47
44
42
Time ON: drum rotating
Time OFF: drum stopped
The speeds may vary slightly depending on the type of load.
The ▲key allows the user to modify the option displayed.
The key validates the selection on the display and allows the user to access the following programmable
function.
Gradual cool down
The gradual cooling down of the water is achieved by adding cold water until a temperature of 45 ºC (113 ºF) is
reached.
This function will appear only if the programmed temperature in the phase is over 50 ºC (122 ºF).
OPTIONS
MEANING
c-0
Gradual cool-down deactivated
c-1
Gradual cool-down activated
The ▲ key allows the user to modify the option displayed.
The key validates the selection on the display and allows the user to access the following programmable
function.
Program stop
All the functions of the washing machine stop, maintaining the water inside, with a light rotation of the drum at
15 minute intervals.
This option can be programmed in any phase of the program.
When programmed before the final phase spin, the indicator light for the function lights up on the control panel.
OPTIONS
MEANING
rh-0
Program stop deactivated
rh-1
Program stop active in the phase
The ▲ key allows the user to modify the option displayed.
The key validates the selection on the display and allows the user to access the following programmable
function.

GIRBAU LOGI CONTROL Specifications

General

Brand	GIRBAU
Model	LOGI CONTROL
Category	Controller
Language	English