Page 23
Optimal Slicing Performance
TO OBTAIN MAXIMUM PERFORMANCE AND YIELD
FROM YOUR GLOBE SLICER:
1. Read this entire manual before touching slicer and strictly follow all instructions and precautions.
THERE IS NO SUBSTITUTE FOR SAFETY!
2. Lubricate slicer per instructions on page 22.
3. Maintain a sharp knife and replace as necessary. Refer to knife sharpening procedure on pages 19
through 20. Globe recommends replacing knife at approximately 12
11/16
'' diameter. Never attempt to
replace knife yourself. Contact an authorized Globe service company to replace knife.
4. Clean knife prior to sharpening slicer knife per instructions on pages 19 through 20.
5. As knife is sharpened and diameter is reduced, it will be necessary to:
a. Adjust table adjusted inward toward knife in order to maintain a consistent 1/16'' clearance between the
table and knife.
b. Fully engage sharpener lever to allow stones to come into full contact with knife.
We recommend an authorized Globe service company
perform all adjustments and preventive maintenance.
See front cover for service contact information.
By adequately maintaining your slicer, it will provide years of dependable
service. The only way to damage a Globe slicer is by neglect.
To Next Page
Loading...
Need help?
General
