To Next PageTo Next Page
Need help?Do you have a question about the GLOW T180 and is the answer not in the manual?
General| Capacity | 180 Liters |
|---|---|
| Type | Electric Water Heater |
| Voltage | 220V/50Hz |
| Thermostat | Adjustable Thermostat |
| Safety Features | Pressure Relief Valve |
| Model | GLOW T180 |
Details safety symbols and instructions to prevent hazards like fire, explosion, or injury.
Provides warnings on installation, combustible materials, codes, and proper ventilation.
Highlights risks associated with gas leaks, electrical shock, and water temperature hazards.
Details the product's compliance with standards and certifications.
Step-by-step guide on how to safely start and operate the water heater.
Procedure for safely shutting off the gas supply to the appliance.
Provides comprehensive specifications including heat input, output, pressure, and dimensions.
Illustrates the physical dimensions and connection points of the water heater.
Presents performance curves for temperature rise and pressure drop versus water flow.
Diagram and list of the internal components of the water heater for reference.
Explains the LCD display, status symbols, and control button functions.
Describes how to navigate the user menu to view parameters and sensor temperatures.
Details how to access and use the service menu for advanced settings and diagnostics.
Details the procedures and parameters accessible via the installer menu for setup.
Specifies installation compliance with national and local building and electrical codes.
Instructions for safely unpacking the water heater and handling packaging materials.
Guidance on securely mounting the unit on a vertical wall and required clearances.
Covers water quality, pressure, thermal expansion, and connections for domestic hot water.
Explains the options and configurations for installing a recirculation pump system.
Details on connecting water lines, including pressure relief valve installation.
Provides guidelines for gas piping, supply pressures, and connections.
Covers electrical wiring requirements, grounding, and connection procedures.
Instructions and guidelines for proper venting to prevent carbon monoxide hazards.
Illustrates required clearances for direct vent terminations to building openings.
Emphasizes the need for qualified personnel and adherence to safety during commissioning.
Checks required before initial startup, including power, gas, water, and venting systems.
Procedure for flushing the system to remove residues and maintain warranty.
Step-by-step guide to starting the water heater after installation and commissioning.
Details system checks and pressure measurements required for gas valve setup.
Instructions for adjusting the gas throttle for optimal CO2 levels and efficient operation.
General safety precautions and requirements for qualified personnel performing maintenance.
Covers periodic inspection of venting, burner, and components for wear.
Procedure for cleaning the heat exchanger using vinegar to remove scale deposits.
Annual inspection points including gas/water seals, combustion, safety systems, and electrical connections.
Instructions on how to remove casing panels to access internal components for maintenance.
Guidelines for gas supply connections, including warnings against unauthorized conversion.
List of lockout codes, their descriptions, and recommended resolutions for appliance errors.
Details blocking error codes and their corresponding troubleshooting steps and resolutions.
Flowchart to diagnose and resolve ignition lock-out issues, checking gas, spark, and flame.
Diagnostic steps for issues related to the high limit switch or microfuse being open.
Procedure to address flue gas temperature exceeding limits, including vent checks and set point adjustments.
Troubleshooting steps for a blocked flue switch, including vent clearing and continuity checks.
Diagnosing DCW inlet sensor failures, checking resistance values and cable continuity.
Steps to diagnose heat exchanger outlet sensor failures, checking resistance and cable integrity.
Troubleshooting DHW sensor open faults, including resistance checks and cable continuity.
Guidance for diagnosing flue sensor open issues, checking resistance and cable integrity.
Flowchart to troubleshoot scenarios where the unit is not producing hot water.
Provides a chart correlating resistance values with temperature for sensor diagnostics.
Lists and illustrates the parts related to the water heater's cabinet and interior assembly.
Identifies parts associated with water inlet and outlet connections, including optional kits.
Details the parts list for electrical connections, including harness and component part numbers.
Outlines exclusions from warranty coverage and limitations of manufacturer liability.
