GLOW T180 - Page 71

Glow T180
Tankless Condensing Water Heater
71
Parts List For Figures 8.1, 8.2, 8.3, 8.4, 8.5 & 8.6
Item# Part# Description
1 GLO-180-103 8-32 X 1/2 STEEL PAN PHILLIP T/SCREWS TYPE F
2 GLO-02 EXHAUST FLUE ADAPTER (LONG)
3 GLO-01 COMBUSTION AIR INLET ADAPTER (SHORT)
4 GLO-02-PLUG PVC VENT PLUG
5 GLO-180-S-01 TOP, BACK & BOTTOM UNI-SHELL
6 GLO-180-S-08 REAR SUPPORT MOUNTING BRACKET
7 GLO-180-S-15 PAINTED - TANKLESS RIGHT PANEL
8 GLO-180-S-16 PAINTED - TANKLESS LEFT PANEL
9 GLO-180-S-09 DOOR, SUPPORT BRACKET
10 GLO-51 HOSE BARB (3/16” NYLON) (1/180 unit)
11 GLO-180-150 BLOCKED FLUE SWITCH (3.28 Mbar)
12 GLO-180-21 BLOCKED FLUE SWITCH MOUNTING BRACKET
13 GLO-59 HEAT EXCHANGER SUPPORT BRACKETS
14 GLO-180-104 10-24 X 1/2 HWH THREAD CUTTING (SCREWS)
15 GLO-180-107 10 - 32 X 1/2” Pan Sq/SI Ms Zp, SCREWS
16 GLO-180-108 10 - 32 K-LOCK NUT
17 GLO-552 IGNITION CONTROL BOARD (ICB)
18 GLO-180-50 3/4” NPT BRASS WATER INLET/OUTLET FITTINGS
19 GLO-180-250 WATER INLET SCREEN (WHITE)
20 GLO-53 7/8” DIAMETER PVC GROMMET
21 GRO-001 CONDENSATE HOSE GROMMET
22 GLO-551 DISPLAY BOARD
23 GLO-180-S-03 DISPLAY BOARD MOUNTING BRACKET
24 GLO-180-51 DISPLAY BOARD REAR ENCLOSURE
25 GLO-180-S-10 METAL ENCLOSURE SUPPORT
26 GLO-180-101 6 X 3/8” SCREWS
27 GLO-180-52 DISPLAY BOARD COVER PLATE
28 GLO-180-S-18 ENCLOSURE LOCKING TABS
29 GLO-180-105 10-32 X 1/2” SCREWS
30
GLO-563 GAS VALVE ADAPTER SCREWS M4 X 12 SOCKETCAP
31 FM-180-HRN-006 POWER SUPPLY CABLE
32 GLO-180-106 M5 X 12 DIN933 -8.8 HEX SCREW
33 GLO-50 FAN/BURNER GASKET
34 GLO-543 FAN
35 GLO-544 FAN / VENTURI O-RING