GLOW T180 - Page 72

Glow T180
Tankless Condensing Water Heater
72
Parts List For Figures 8.1, 8.2, 8.3,8.4, 8.5 & 8.6 (continued)
Item# Part# Description
36 GLO-545 VENTURI (NG)
36 GLO-546 VENTURI (LP)
37 GLO-547 GAS VALVE RUBBER COUPLING
38 GLO-180-S-11 DISPLAY ENCLOSURE SUPPORT BRACKET
39 GLO-180-109 VENTURI MOUNTING HEX SCREW
40 GLO-180-110 GAS VALVE MOUNTING SCREW
41 GLO-541 GAS VALVE (NG)
41 GLO-542 GAS VALVE (LPG)
42 GLO-180-40 1/2” X 3/4” BRASS REDUCER, GAS
43 FLM-005 3/4” INLET WATER STUB - WITH UNIONS
44 GLO-40 3/4” RUBBER WASHER
45 GLO-52 DCW FLOW SENSOR
46 FLM-004 INLET WATER PIPE - WITH 3/4” BRASS UNION
47 GLO-41 WATER TEMPERATURE SENSOR
48 GLO-46 O-RING (180)
49 GLO-180-45 SS CLIP FOR COPPER PIPE
50 GLO-180-41 GEAR CLAMP
51 GLO-180-111 HEAT EXCHANGER CONDENSATE TUBE
52 GLO-48 CONDENSING TRAP
53 GLO-180-112 SEAL, CONDENSATE TRAP
54 GLO-180-113 PLASTIC UNION NUT, CONDENSATE TRAP
55 GLO-47 CONDENSATE DRAIN
56 FLM-003 OUTLET WATER TUBE - WITH 3/4” BRASS UNION
57 EKA-323-39 DHW HIGH TEMPERATURE LIMIT SWITCH (95°C)
58 GLO-180-100 HIGH LIMIT SWITCH SCREW
59
GLO-180-S-12
IGNITION TRANSFORMER MOUNTING BRACKET
60 GLO-49 IGNITION TRANSFORMER
61 GLO-43 IGNITION ELECTRODE CABLE (180)
62 GLO-44 LEAD, IONIZATION ELECTRODE CABLE (180)
63 GLO-60 HEAT EXCHANGER SUPPORT CLAMP
64 GLO-58 HEAT EXCHANGER ASSEMBLY ((INCLUDES BURNER/ELECTRODE)
65 GLO-42 HEAT EXCHANGER FLUE TEMPERATURE SENSOR
66 GLO-180-S-17 PAINTED - TANKLESS DOOR
67 GLO-180-22 SILCONE CONDENSATE HOSE 36”
68 GLO-65 BLACK POLYPRO BARBED TEE, 3/16”