GMC 1997 Suburban - Step-Bumper Pad

Step-Bumper Pad
If your vehicle has a rear step bumper, it may be
equipped with a rear step pad at the center of
the bumper.
If you will be using the
bumper to tow a trailer, you
must remove the center
cutout circle to install the
trailer ball. You must also
remove both outer cutouts
to attach the trailer
safety chains.
To remove the pad, lift the
edge
of the pad from the
rear of the bumper and
swing
it forward. When the
pad releases from the
bumper holes, lift the
pad
off. .
4-57