TX6160 INSTRUCTION MANUAL
10
FEATURES
Feature Description
Transmit (TX)
TX6160 - 5/1 watt RF Power: Selectable transmitter power allows you
to conserve battery power when transmitting in close range by using
the Low Power setting.
Individually programmable Duplex function: User selectable for only
those individual channels in your area that have repeaters, leaving
others free for use as extra simplex channels.
Receive (RX)
80† channels 477 MHz UHF CB.
Power Save feature: Conserves battery power by sleeping during
periods of inactivity.
Calling Tone and Roger Beep: Alerts you to incoming calls.
Signal receive indicator.
Scanning and Memory
Functions
Microprocessor controlled frequency synthesiser:
Allows user programmable control of scanning, channel memories
and selected feature options.
Programmable scan function: Scans up to 80 UHF CB channels.
Dual Watch: Monitors two channels simultaneously.
Privacy Functions
Voice Inversion Scrambler: A simple voice scrambler that, when
activated, will make your transmission and reception intelligible only
to other radios using the same scrambler technology.
CTCSS & DCS: A built-in Continuous Tone Coded Squelch System and
a Digital Coded Squelch option provide quiet channel operation.
Physical Properties
Water & Dust proof IP67: Provides protection against dust and
temporary immersion in water.
Removable exible antenna.
Rugged construction with Die-cast Chassis.
User Controls and Interface
Keypad Lock: Prevents accidental button presses.
Backlit LCD: For night viewing.
Waterproof/Dustproof speaker microphone - Rated IP67.
† Refer the preface for important information concerning the UHF CB radio.
To Next Page
Loading...
