GME TX6160X - Dual Watch and Call Alarm

29
TX6160 INSTRUCTION MANUAL
CALL ALARM SELECTION
The radio provides 5 user-selectable Call Alarm melodies to alert other users to your incoming call. When
enabled, the melody can be transmitted to another user where it will be heard in the speaker of the
receiving radio.
To select your favourite call alarm melody:
1. Press and hold the Menu key until the radio beeps.
2. Press the Menu key repeatedly until ‘CL’ is displayed. Call number 1 – 5 or ‘oFF’ will be
ashing.
3. Press the or keys to preview (listen to) the 5 available Call Melodies (1 – 5).
4. To disable the call melodies, select ‘oFF’. Press the PTT switch to conrm and store your
selection.
To send the Call Alarm Melody:
Press the PTT switch twice quickly. The icon and cAll (1-5) will appear and the LED indicator will light
red for a few seconds as the melody is sent. The melody will be heard in the speaker of the receiving
radio.
Note: The Call Alarm can only be sent once per minute.
DUAL WATCH
The Dual Watch mode lets you to monitor two channels at the same time. While in dual watch mode, the
unit will monitor both the selected channel and a second dual watch channel.
To set the dual watch mode:
1. Use the or keys to choose the selected channel.
2. Press and hold the Menu key until the radio beeps.
3. Press the Menu key repeatedly until ‘DW’ is displayed. The icon will be ashing.
4. Press the or keys to select the second dual watch channel or select ‘oFF’ to disable the
dual watch mode.
5. Press the PTT switch to conrm and store your selection.
While dual watch is active, the iconicon and LCD will alternate between the selected channel and the
dual watch channel.