1-4
USER HANDBOOK
1.3 DATA LOGGING
Data logging allows gas values, summary logs and calibration
details to be logged at regular intervals and later downloaded.
1.3.1 Viewing Data Logged Readings
Data logged readings can be downloaded from the instrument,
to a PC, using GMI software and communication adaptor.
Contact our Sales Department at GMI for further details.
1.4 HYDROPHOBIC FILTER(S)
Filter(s), if tted, should be checked regularly and replaced if
contaminated. See “4.2 FILTER REPLACEMENT” on page
4-1.
1.5 CONSTRUCTION
The instrument is housed in a tough, impact resistant moulded
case. The instrument is sealed to IP65 and the sensing
elements, sample inlet and charging socket sealed to IP54.
The instrument withstands physical impact testing to EN
61779.
1.6 IDENTIFICATION LABEL
The label on the rear of the instrument contains the serial
number and certication details (this serial number also
appears on the instrument display after switch on, during
warm-up).
To Next Page
Loading...
Need help?
General
