GMI PS500 - Calibration; General Description

5-1
CALIBRATION
5.1 GENERAL DESCRIPTION
The PS500 has been calibrated for particular gases. Where
any doubt exists the product should be returned to GMI or an
authorised distributor for calibration.
Warning: The instrument must be calibrated and
congured by authorised personnel only.
Several methods of calibration are possible:
• The PS500 Automatic Bump / Calibration Station provides
controlled delivery of gases allowing you to calibrate in
a controlled manner and maintain a record of calibration
results on a PC.
• exiCal Plus software allows the instrument to be linked
to a PC running Calibration software and applying gas
manually.
• Field Calibration. See ‘CONFIGURATION HANDBOOK’
for further details.
Note: The calibration methods are manufactured by
GMI. For more detail contact GMI or an authorised
distributor.
5