GMI PS500 - Removing and Replacing a Battery Pack

4-14
USER HANDBOOK
PS500
4.3.2 Removing and Replacing a Battery Pack
Caution 1: Always switch the instrument off before
removing the battery pack.
Caution 2: Always replace the protective cap in the Long
Duration battery pack charging socket before
use.
WARNING
Rechargeable battery pack must be recharged and replaced
in a non-hazardous area.
WARNING
Replace alkaline / rechargeable battery pack only with genuine
GMI parts.
1. Unscrew the captive screw, using the hex key (supplied),
as shown in Fig. 4.10.
HEX KEY
Fig. 4.10 Battery Pack Captive Screw