2-11
OPERATION
The example shown in Fig. 2.14 illustrates the maximum
gas values stored.
Fig. 2.14 Maximum Gas Values
2. Press the button again to view the minimum gas
values stored in the instrument.
Note: This screen is only displayed when an Oxygen
sensor is tted in the instrument.
The example shown in Fig. 2.15, illustrates the minimum
gas values stored.
Fig. 2.15 Minimum Gas Values
3. These readings can be reset, by pressing
and holding the button for two seconds if the
instrument is clear of all alarms. This will return
the instrument to the normal operating screen.
To Next Page
Loading...
