GN Danalogic Ambio BRIE - Phone Now; Place the Phone Now Magnet

20 21
i
NOTE: If the phone has a poor telecoil signal, use the microphone
programme. To avoid whistling, do not hold the handset too ghtly
against your ear.
NOTE: Ask your hearing care professional to enable the Telecoil
programme in your hearing aids.
NOTE: If you see a “M3”, “M4”, “T3”, or “T4” on the box, then the
smartphone is HAC compliant.
NOTE: If you nd it dicult to obtain a good result while using your
smartphone, your hearing care professional will be able to give
you advice on available wireless accessories to enhance listening
capabilies.
NOTE: Ask your smartphone dealer or hearing care professional for
advice regarding HAC smartphones.
8.3 Phone Now
By placing a magnet on the telephone receiver, your hearing aids
automacally switch the telephone programme on when the receiver is
close to your ear.
When you remove the receiver from your ear, the hearing aids
automacally return to the previous listening programme.
i
NOTE: Ask your hearing care professional to enable Phone Now as
one of your programmes.
Clean the telephone
thoroughly.
Remove foil from
magnet.
Place the magnet.
8.3.1 PlacethePhoneNowmagnet
Follow these steps in order to place the Phone Now magnet properly:
i
WARNING: IF A MAGNET IS SWALLOWED, SEEK IMMEDIATE
ASSISTANCE FROM A MEDICAL PRACTITIONER.
i
NOTE: Ask your hearing care professional to enable Phone Now as
one of your programmes.
NOTE: Do not cover the loudspeaker opening with the magnet.
NOTE: If Phone Now does not work to your sasfacon, moving the
magnet to another posion may improve ease of use and comfort
while speaking.
NOTE: If the hearing aids do not switch to the telephone
programme every me, you can reposion the Phone Now magnet
or add addional magnets.
NOTE: Use a recommended cleaning agent.