GN Danalogic Ambio BRIE - Warranties and Repairs; Temperature Test, Transport, and Storage Information

52 53
This device operates in the frequency range of 2.4 GHz - 2.48 GHz.
This device includes an RF transmier that operates in the range of 2.4 GHz
- 2.48 GHz.
Nominal RF output power transmied is 0 dBm.
Mini Receiver In-the-Ear (RIE) hearing aids of type VE312 with FCC ID:
X26VE312, IC number 6941C-VE312 and size 312 baery are available in
the following variants:
AM561-DRW MP AM561-DRW HP AM561-DRW UP
Receiver-in-the-ear (RIE) hearing aids of type BRIE with FCC ID X26BRIE,
IC number 6941C-BRIE and size 13 baery are available in the following
variants:
AM562-DRW MP AM562-DRW HP AM562-DRW UP
The idencaon number for the menoned device models can be found
behind the baery door as indicated in the illustraons on page 9.
24 Warranes and repairs
Manufacturer provides a warranty on hearing aids in the event of
defects in workmanship or materials, as described in applicable warranty
documentaon. In its service policy, manufacturer pledges to secure
funconality at least equivalent to the original hearing aid. As a signatory to
the United Naons Global Compact iniave, Manufacturer is commied
to doing this in line with environment-friendly best pracces. Hearing aids
therefore, at manufacturer’s discreon, may be replaced by new products
or products manufactured from new or serviceable used parts, or repaired
using new or refurbished replacement parts. The warranty period of
hearing aids is designated on your warranty card, which is provided by your
hearing care professional.
For hearing aids that require service, please contact your hearing care
professional for assistance. Hearing aids that malfuncon must be repaired
by a qualied technician. Do not aempt to open the case of hearing aids,
as this will invalidate the warranty.
25 Temperature test, transport, and storage informaon
These hearing aids are subjected to various tests in temperature and damp
heang cycling between -25°C (-13°F) and +70°C (158°F) according to
internal and industry standards.
During transport or storage, the temperature should not exceed the limit
values of -20°C (-4°F) to 60°C (140°F) and relave humidity of 90% RH, non-
condensing (for limited me). The air pressure between 500 hPa and 1,100
hPa is appropriate.
© 2018 GN Hearing A/S. All rights reserved. ReSound is a trademark of
GN Hearing A/S. The Bluetooth word mark and logos are registered
trademarks owned by the Bluetooth SIG, Inc.
.