GN Danalogic Ambio BRIE - Change Wax Guard on RIE Receiver

30 31
11.3 Change wax guard on RIE receiver
To replace wax lters on receivers and earmoulds, follow these steps:
1. Carryingboxwitheightwaxguardtools
2. Thewaxguardtoolhastwofuncons:
• A removal p to collect the used lter
• A replacement p with a white lter
Insert the removal p of the tool into the used wax guard so that the sha
touches the rim of the wax guard.
Slowly pull the wax guard straight out.
Insert the replacement p of the tool into the sound outlet.
Gently press the replacement p straight into the sound outlet unl the
outer ring lies ush with the sound outlet.
Pull the tool straight out - the new wax guard will remain in place.
i
NOTE: To ease removal and inseron, it may help to twist the wax
guard tool.
To insert the new wax lter, follow these steps: