GN Danalogic Ambio BRIE - Page 24

46 47
FULL-ON AND REFERENCE TEST GAIN
MAXIMUM OUTPUT (OSPL 90)
Note: Telecoil sensivity only applicable for 62 RIE models
Reference test gain (60 dB SPL input) HFA 37 dB
Full-on gain (50 dB SPL Input)
Max
HFA
58
51
dB
dB
Maximum output (90 dB SPL input)
Max
HFA
116
114
dB SPL
dB SPL
Total harmonic distoron
500 Hz
800 Hz
1600 Hz
0.5
0.6
1.2
%
%
%
Telecoil sensivity (SPLIV @ 31.6 mA/m) 96 dB SPL
Equivalent input noise (w/o noise reducon) 23 dB SPL
Frequency range (DIN 45605) 100–7000 Hz
Current drain (in test mode) 1.3 mA
RIE—MP receiver
AM561-DRW, AM562-DRW
Frequency (Hz)
Gain
(dB)
Reference test gain
60 dB SPL input
Full-on gain
50 dB SPL input
2cc Coupler
Frequency (Hz)
Output
(dB SPL)
2cc Coupler
21 Technical data
Reference test gain (60 dB SPL input) HFA 42 dB
Full-on gain (50 dB SPL Input)
Max
HFA
65
56
dB
dB
Maximum output (90 dB SPL input)
Max
HFA
122
118
dB SPL
dB SPL
Total harmonic distoron
500 Hz
800 Hz
1600 Hz
0.6
1.2
0.7
%
%
%
Telecoil sensivity (SPLIV @ 31.6 mA/m) 101 dB SPL
Equivalent input noise (w/o noise reducon) 23 dB SPL
Frequency range (DIN 45605) 100–6030 Hz
Current drain (in test mode) 1.3 mA
RIE—HP receiver
AM561-DRW, AM562-DRW
Frequency (Hz)
Gain
(dB)
Reference test gain
60 dB SPL input
Full-on gain
50 dB SPL input
2cc Coupler
Frequency (Hz)
Output
(dB SPL)
2cc Coupler
FULL-ON AND REFERENCE TEST GAIN
MAXIMUM OUTPUT (OSPL 90)
Note: Telecoil sensivity only applicable for 62 RIE models
Data in accordance with IEC60118-7 and
ANSI S3.22-2009, supply Voltage 1.3V
Data in accordance with IEC60118-7 and
ANSI S3.22-2009, supply Voltage 1.3V