EasyManuals Logo

go-e Gemini flex User Manual

go-e Gemini flex
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
1313
Safety functions
Gemini ex 11 kW Gemini ex 22 kW
RCD protection module with DC
current detection
20 mA AC, 6 mA DC
Protection class I
Pollution degree
II
Anti-theft device Charging cable locking device
RFID access control One learned RFID chip included
Input voltage Phase and voltage testing
Switching functions Testing of the switching functions
Ground check
For TT, TN grids
(deactivatable ground check for IT grid - Norway mode)
Current sensor 3-phase
IP55
Protected against dirt and water,
suitable for permanent outdoor operation
go-e network operator API
For authorised access by the electricity grid operator to the go-e Charger
for grid-serving power control
Modbus TCP
e.g. for grid-serving power control by the electricity grid operator
Charging capacity
Gemini ex 11 kW Gemini ex 22 kW Remark
Single-phase
charging car¹
1.4 kW
to 3.7 kW
1.4 kW
to 7.4 kW
Country-specic limitations
need to be observed
Two-phase
charging car¹
2.8 kW
to 7.4 kW
2.8 kW
to 14.8 kWC
Two-phase connection of the charger is
not possible
Three-phase
charging car¹
4.2 kW
to 11 kW
4.2 kW
to 22 kW
go-e Charger switches through the pow-
er that is available at the connection
¹Charging power depending on the number of phases of the car‘s onboard charger
Connection to vehicle
Gemini ex 11 kW Gemini ex 22 kW
Type 2 socket (acc. to EN 62196-2) with mechanical locking device
(own type 2 cable required, available as accessory)
Vehicles with type 1 can be charged with adapter cable type 2 to type 1
(available as accessories)
7. Technical data

Other manuals for go-e Gemini flex

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the go-e Gemini flex and is the answer not in the manual?

go-e Gemini flex Specifications

General IconGeneral
Connector TypeType 2
Product TypeWallbox
RFIDYes
MID MeterYes
Protection ClassIP54
ConnectivityEthernet
CompatibilityAll EVs with Type 2 connector
Input Voltage400 V AC
Output Voltage400 V AC
Dimensions350 x 220 x 110 mm

Related product manuals