go-e Gemini flex - Page 14

1414
Connection to infrastructure
Gemini ex 11 kW Gemini ex 22 kW
CEE red 16 A (3-phase) CEE red 32 A (3-phase)
With original go-e adapters (not included in the scope of delivery, available as accessories):
to CEE red 32 A
(three-phase - limitation by charging station to 16 A)
to CEE red 16 A
(three-phase)
to CEE blue 16 A (single-phase) to CEE blue 16 A (single-phase)
to multiple domestic plugs 16 A
(domestic socket - single-phase)
to multiple domestic plugs 16 A
(domestic socket - single-phase)
go-e Charger app and connectivity
Gemini 11 ex kW Gemini ex 22 kW
Local (WiFi hotspot) or worlwide* (WiFI) controlling and monitoring
Adjustment/check of the charge (voltage, current, power, energy)
Adjusting the current level in 1 ampere steps
Start/stop function and Scheduler
Management of RFID chips/cards (up to 10 users per charger) / Access control (RFID/App)
OCPP 1.6*
Electricity meter (total kWh and total amount per RFID chip)
kWh limit mode / ECO mode* / Planned charge mode*
Push notications*
Cable unlock functions
Flexible energy tarifs with intelligent charging management*/**
Static load balancing*
Photovoltaic connection via open API interface (programming required)*
LED adjustment
Management of the charging levels via button on the charging station
Updateable for later functions (Smart home, etc.)*
Automatic unlocking of the charging cable in the event of a power failure
1-/3-phase switching via app - even during the charging process
Synchronisation of charging processes with the cloud and display of the past charging processes*
Documented public API interfaces: HTTP , MQTT, Modbus TCP
*WiFi connection of the charger required
**Separate electricity supply contract with partner aWATTar required, currently only available in Austria and Germany
7. Technical data