EasyManua.ls Logo

go-e Gemini flex - Before Installation and Commissioning; Registration Information; Safety Regulations and Notes; General Safety Regulations

go-e Gemini flex
34 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
66
Observe all safety regulations and inst-
ructions in this manual!
Read the manual and the data sheet ca-
refully and keep them for future referen-
ce. The documents are intended to help
you:
Note before installation and commissioning
Download the data sheet:
www.go-e.com
Instructions and downloads
To use the product safely and properly
Increase the durability and reliability
To avoid damage to the device or pro
perty
To prevent a threat to life and limb
Depending on the country, the require-
ments of the authorities and electricity
grid operators have to be observed,
such as a registration or approval requi-
rement for charging stations, or the limi-
tation of single-phase charging.
Registration information
Please contact your electricity grid ope-
rator to nd out whether the go-e Char-
ger is subject to registration or approval
and whether other restrictions must be
observed.
4. Safety regulations/notes
3. Before installation and commissioning
The go-e Charger may only be used for
charging battery electric vehicles (BEV)
and plug-in hybrids (PHEV) with the ad-
apters and cables intended for this pur-
pose.
Disregarding the safety regulations can
have serious consequences. go-e GmbH
declines any liability for damage caused
by disregarding the operating instruc-
tions, safety regulations or warnings on
the unit.
General safety regulations

Other manuals for go-e Gemini flex

Related product manuals