Goblin FIREBALL - Page 27

Page 26
Chapter 19, Spare Parts
- 1 x Yellow Tail Boom.
- 1 x Boom Sticker.
- 4 x Washer Ø2.5xØ4.5 x 0.5mm.
- 4 x Socket Head Cap M2x6mm.
- 1 x Landing Gear.
- 4 x Washer Ø2.5xØ4.5 x 0.5mm.
- 4 x Socket Head Cap M2x8mm. - 3 x Servos Linkage.
- 10 x Shim Ø4.5xØ5.9x0.3mm.
- 1 x Spindle.
- 2 x Socket Head Cap M3x6mm.
- 1 x Tail Fin.
- 1 x Flanged Bearing Ø3xØ8x3mm.
- 1 x Tail Fin Sticker.
- 5 x Uniball M2xØ4xH3.
- 1 x Uniball M2xØ3H13. - 1 x Swashplate SET.
- 1 x Main Blade Grip.
- 1 x Ball Bearing Ø4xØ9x2.5mm.
- 1 x Thrust Bearing Ø4xØ9x4mm.
- 1 x Socket Head Cap M2x6mm.
- 1 x Socket Head Cap M3x6mm.
Boom
(H0818-S)
Landing Gear
(H0799-S)
Tail Blade Grip
(H0798-S)
Bell Crank Clever
(H0797-S)
Servo Linkage
(H0796-S)
Blade Grip Arm Plastic
(H0795-S)
Shim Ø4.5xØ5.9x0.3
(H0794-S)
Spindle
(H0792-S)
Tail Fin
(H0791-S)
Uniball M2xØ4xH3
(H0789-S)
Swashplate
(H0788-S)
Main Blade Grip
(H0785-S)
- 1 x Blade Grip Arm Plastic.
- 1 x DFC Arm.
- 1 x Plastic Ball Link.
- 2 x Flanged Bearing Ø2xØ5x2.5.
- 1 x Socket Head Cap M2x8mm.
- 1 x Socket Head Cap M2x5mm.
- 1 x Bell Crank Clever.
- 1 x Bushing Ø2xØ3 x 3mm.
- 1 x Uniball M2xØ4xH3.
- 2 x Tail Pin.
- 2 x Flanged Bearing Ø2xØ5x2.5.
- 1 x Socket Head Cap M2x12mm.
- 1 x Shim Ø2.1 x Ø3.6 x 0.2mm.
- 2 x Tail Blade Grip.
- 4 x Bearing Ø3 x Ø6 x 2mm.
- 2 x Thrust Bearing Ø3xØ6x2.8mm.
- 2 x Shim Ø4.5xØ5.9x0.3.
- 2 x Washer Ø2.5xØ4.5 x 0.5mm.
- 2 x Socket Head Cap M2x5mm.