Gocycle G2 - Warning! Take Care During Assembly

To Next Page

To Previous Page

Gocycle

Owner’s Manual for G2R, August 2015

4.2

Warning! Take Care during Assembly

When folding the handlebar stem there is potential for the internal cabling to be pinched by the

folding mechanism. Severe pinching may compromise the integrity of the cabling, which in the worst

case may cause the product to not function correctly.

Location

Correct cable positioning

Caution! Incorrect positioning

Thoroughly inspect the handlebar folding mechanism when folding/unfolding, taking care not the

pinch any internal cabling (pictured). Never force the handlebar stem. If a cable is positioned

incorrectly, STOP and ensure the cable is repositioned before continuing.

During assembly or disassembly, do not over-fold the Cleandrive more than is necessary to engage or

disengage the Gocycle Lockshock™. Over-folding the Cleandrive can cause the internal cables to

become taut and in some cases may result in cables becoming disconnected, ultimately affecting the

operation of the product.

Other manuals for Gocycle G2