Gocycle G2 - Gocycle Registration and App

Gocycle
®
Owner’s Manual for G2R, August 2015
© Karbon Kinetics Limited. All Rights Reserved. 27
For more details about these and other available accessories, including purchasing information and
assembly guides, visit www.gocycle.com.
4.8 Gocycle Registration
IMPORTANT: YOUR GOCYCLE REQUIRES REGISTRATION!
Unless registered, after 60 miles (100 km), your Gocycle motor will cease to operate.
4.8.1 GocycleConnect App Registration: Benefits
Gocycle is enabled with Bluetooth
®
wireless technology
and requires the Gocycle App to connect via a smart
device. Download and install the GocycleConnect App
to your Apple or Android device to enjoy numerous
benefits including:
 Read live battery charge state
 Odometer and resettable trip counter
 Resettable calories burned counter
 Update your Gocycle to the latest firmware
 Upload your Gocycle Data Log to assist with
fault diagnosis
 Anti-theft: Disable your Gocycle if stolen
 Stay updated with important safety
announcements
You can personalise the settings via the App and save
the settings to suit your riding style and assistance
preferences, including:
 Pedal effort required for motor to start
 Pedal effort required for maximum motor
assistance
 Maximum speed
 Pedalling required for motor assistance ON/OFF
Odometer Recording
Gocycle has a sophisticated odometer which measures and records the total distance covered. Like
with a car, this information cannot be overwritten. It is therefore possible to determine how far you
have travelled with your Gocycle since new.
4.8.2 Pre-Registration: Delivery State Explained
Gocycle is shipped in Delivery State and will require registration via the GocycleConnect App to gain
full functionality. Delivery State allows 60 miles (100 km) of normal usage before the motor will cease
to operate. You must register your Gocycle within this distance to remove the restriction and avoid
loss of motor function.
When stationary and not in use for more than 60 seconds, the dashboard will flash, displaying the
delivery distance used. The greater the number of LEDs, the closer it is to the point that the motor will
cease to operate. One LED equals approximately 3 miles (5 km).