Gocycle
®
Owner’s Manual for G2, August 2015
© Karbon Kinetics Limited. All Rights Reserved. 76
7.11
Adjusting the Stem Quick Release Lever
It is unlikely that you will need to adjust Steam Quick Release Lever, however in the event that you
need to replace the lever you will need to adjust the clock nut on the opposite side of the stem
adjuster to ensure the quick release lever closes with the correct force.
Undo the clock nut securing
bolt using a 2.5mm Allen key
Remove the clock-nut as
shown
Install the QR Lever and hold
in the closed position,
ensuring it is in the correct
zone as demonstrated in the
below photo.
To Next Page
Loading...
