Gocycle
®
Owner’s Manual for G2, August 2015
© Karbon Kinetics Limited. All Rights Reserved. 81
8 TROUBLESHOOTING
8.1
Unknown Gear State: Gears Will Not Shift
Symptom: No gear shift LEDs are visible on the dashboard display and it is not possible to shift
between gears. The gears remain in the last selected gear.
Resolution: To return to normal shifting, stop riding and remain stationary for up to 5 seconds with
both brakes applied. The Gocycle will reset to first gear and the gear shift LEDs will return to the
dashboard.
8.2
Gears Will Not Shift Down Automatically
Symptom: Whilst decelerating, the gears are not shifting down automatically. Only when completely
stopped does the Gocycle shift to first gear.
Resolution: Check that Predictive Shifting is ON. See 6.2.1Turning Predictive Shifting ON/OFF for
more information.
Resolution: First confirm that Predictive Shifting is ON. The gear will only change automatically when
decelerating from a speed greater than that at which the predictive shift is programmed to change
(e.g., from 3rd gear to 2nd gear at speed 7 LEDs and from 2nd gear to 1st gear at speed 3 LEDs). If you
shift to 3rd gear, but remain below speed 7 LEDs, when decelerating the shifting will not be
automatic. Shift down manually by double-clicking the gear shift button, as you would with a
computer mouse.
To Next Page
Loading...
