EasyManua.ls Logo

Gocycle G2 - First Ride; Steerer Stop

Gocycle G2
91 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Gocycle
®
Owner’s Manual for G2R, August 2015
© Karbon Kinetics Limited. All Rights Reserved. 6
2.9
First Ride
WARNING! First familiarise yourself with the modes of operation, controls and performance of your
Gocycle before venturing onto busy streets.
We strongly recommend that you familiarise yourself with your new Gocycle by first riding it in a
controlled environment, away from potential hazards such as moving traffic and obstacles. It is
important to become familiar with the modes of operation, controls, brakes and the different
performance characteristics inherent in the electric motor.
WARNING! Your braking efficiency will increase during the first few rides as your brake disks and
pads “bed in”. To accelerate the increase in braking performance, perform a number of controlled
stops under hard braking.
2.10
Steerer Stop
Your Gocycle is fitted with a steerer-stop to prevent over-rotation of the handlebars, which would
cause the internal cables to be stressed under tension. Do not attempt to force your handlebars past 90
degrees from straight.
CAUTION! Do not attempt to rotate the handlebars beyond 90 degrees from straight.
Never over-rotate the handlebars. Damage caused by ignoring the warning will not be covered under
warranty.

Table of Contents

Other manuals for Gocycle G2

Related product manuals