Gocycle
®
Owner’s Manual for G2, August 2015
© Karbon Kinetics Limited. All Rights Reserved. 43
In this mode, within the motor operating speed and whilst the rider is providing pedal input, the
motor will start automatically and will continue to operate until the maximum speed is reached.
For maximum motor assistance, press and hold the red power button.
Above the maximum motor speed, the motor will stop. There is no need to press the red power
button. When the pedals cease to rotate or with reduced pedal input, the motor will stop.
Customisable via Gocycle App
See www.gocycle.com/app for
more information
Control motor assistance level—must be
turning
High pedal effort, or press and hold red
power button
Top Speed (Motor Cut-Out
Speed)
Custom mode enables a rider to edit various mode settings including;
Pedal effort required for motor to start
Pedal effort required for maximum motor assistance
Maximum speed
Pedaling required for motor assistance ON/OFF
Updating firmware
Fault diagnosis
Gocycle is Bluetooth
®
-enabled and requires the Gocycle App to connect via a smart device. The user
can personalize the settings via the App and save the settings to suit the user’s riding style and
assistance preferences.
For more information, please visit www.gocycle.com/app or contact your local reseller.
WARNING! It is possible to edit the
Custom
mode to deliver a speed that is greater than the
maximum speed defined by the European EPAC standard EN 15194.
Consult your local transport authority for information on legal restrictions.
6.3.2.5 Power Save
Your Gocycle will default to Power Save when the battery has reached a low level. The mode is
represented by the battery low level warning indicator (one flashing LED) on the dashboard display.
All riding modes will default to Power Save mode when a low battery level is reached.
To Next Page
Loading...
