Gocycle
®
Owner’s Manual for G2, August 2015
© Karbon Kinetics Limited. All Rights Reserved. 49
Whether or not the bicycle has been ridden over large bumps such as potholes or curbs
The amount and weight of luggage carried
The speed at which it has travelled
Whether it has been subject to abuse or vandalism
Time of exposure to ultraviolet radiation from the sun
Storage conditions, such as ambient temperature and moisture levels
Responsible, safe riding and regular maintenance, such as within the guidelines of this manual,
should afford many thousands of miles of operation of your Gocycle. Nevertheless, you must inspect
the Gocycle every 500 miles to see if any of the components have cracks and need replacing. To do
this, clean the Gocycle thoroughly with a damp cloth. Wipe away all dust or dirt. Look carefully at all
the components under good lighting.
Important sites where cracking may initiate are shown in the images below. If a crack is more than
3mm long, do not ride the Gocycle and immediately contact techsupport@gocycle.com. Under normal
conditions, items under warranty will be replaced.
WARNING! Failure to inspect the Gocycle thoroughly may have serious consequences and could result
in serious bodily injury or even death.
Check for fatigue cracks where the
spokes join the rim of the wheel
To Next Page
Loading...
