Gocycle
®
Owner’s Manual for G3, March 2016
© Karbon Kinetics Limited. All Rights Reserved. 56
7 MAINTENANCE AND ADJUSTMENTS
7.1
Maintenance and Service Centre Location
In the event that you require maintenance and service please refer to your nearest authorized Gocycle
service center. A list of approved service centers can be found at www.gocycle.com. Before
attempting any maintenance on your Gocycle you must visit www.gocycle.com/safety for up to date
important safety related information.
NOTE: After 100 miles/160 kms and every further 500 miles/800 kms, the dash will alternatively flash
all battery leds “C” and all speed leds “E”. This is an important safety reminder that a service or
inspection is due. In the event that your dash is flashing the service reminder, please visit
www.gocycle.com/safety and review any important Technical Bulletins and safety information relating
to your Gocycle model. You should also download and review the latest Owner’s Manual from
www.gocycle.com/manuals. After visiting www.gocycle.com/safety you can hold selector A and
selector B simultaneously rotated wrist down for 3 seconds to return the dash to normal display.
Note, by resetting the service reminder you are confirming that you have visited
www.gocycle.com/safety and have understood any Technical Bulletins or new information relating to
your Gocycle and you have downloaded and reviewed the Owner’s Manual relating to your Gocycle.
7.2
Service interval
7.3
Visual Inspection Guide – (Every 3 Months/ 500 Miles)
The following information details mandatory inspection points to be completed every 3 months/ 500
miles (whichever is sooner) of Gocycle ownership. This is to ensure your Gocycle is safe to ride and
operating at peak performance. If you find any of the following items to be damaged or incorrectly
adjusted then please seek immediate assistance from your nearest Authorised Gocycle Service Centre
who will help rectify any issue. Do not adjust fixtures without first consulting the Owner’s Manual or
To Next Page
Loading...
