Gocycle
®
Owner’s Manual for G3, March 2016
© Karbon Kinetics Limited. All Rights Reserved. 72
7.8
Adjusting the PitstopWheel Quick Release Cam Levers
All three Pitstopwheel quick release cam levers should have equal resistance when closing or
opening. As per the pre-ride checks there must be a maximum of 10mm free play measured at the tip
of the cam lever when open. In the event that the levers have different closing/ opening resistance or
free play in excess of 10mm you must adjust the cam levers before riding.
Adjusting the Pitstopwheel cam levers is an important task throughout the lifetime of the product.
Cam levers will settle after initial use and prolonged use will cause wear. As such the cam levers
require vigilant attention and adjustment including checking every cam as part of the pre ride checks.
To Next Page
Loading...
