Gocycle
®
Owner’s Manual for G3, March 2016
© Karbon Kinetics Limited. All Rights Reserved. 71
Using pliers, bend open the split pin to
lock it in place.
WARNING! Do not attempt to ride your
Gocycle without re-installing the brake
pads and securing split pin.
Doing so may result in injury.
Replace both calliper securing bolts.
Secure to a torque of 6-8 Nm.
Ensure that the brake calliper is parallel
to the disk rotor when tightened.
WARNING! The braking performance of
new brake pads will increase over time.
Ensure that you “bed-in” your brakes by
performing a number of stops
To Next Page
Loading...
