Gocycle G3 - Page 85

Gocycle
®
Owner’s Manual for G3, March 2016
© Karbon Kinetics Limited. All Rights Reserved. 81
Check for loose headset. There
should be no play in the steerer
assembly.
Remove front wheel and
carefully place Gocycle onto a
non-slip surface. Grip the
handlebars and rock forwards
and backwards to check for any
fore-aft movement between the
handlebar stem fork assembly
and the main frame as shown.
The connection of the handlebar
stem fork assembly and the front
frame should feel solid and only
be free to rotate with respect to
the main frame.
Remove the rubber dust boot as
shown and loosen the two fork
crown bolts approximately 1-2
turns. Ensure that the front fork
and handlebars are able to rotate
independently.
Headset
here
could be
loose.