Gocycle G3 - Page 95

Gocycle
®
Owner’s Manual for G3, March 2016
© Karbon Kinetics Limited. All Rights Reserved. 91
Select Pedal and Wheel Sensor
Physical Check, mode 12.
Rotate the rear wheel.
When movement of the rear
wheel is detected, one LED
will light on the right-hand
side of the dashboard
display.
Note: When functioning
correctly, in a full rotation of
the rear wheel, the LED will
flash four times.
Now rotate the pedal cranks
in a backwards direction, as
shown.
When movement of the
pedal cranks is detected, two
LEDs will light on the left
hand side of the dashboard
display.
Note: When functioning
correctly, in a full rotation of
the pedal cranks, the two
LEDs will flash eight times.