3.7 Dump Mode Begin
For make sure provide us correct information for check what commands sentfrom the PC or software, please
following below steps,
STEP 1, Let the printer enter Dump Mode
Here is how you switch to dump mode:
On the Ready Page, three function mode for setting. You can make various setting functions in FUNCTIONAL
MODE.
1. Tap‘’Main ‘’ on LCD menu
2. Tap‘’ Printer Control ‘’
3. It will show Printer Control setting items such as Configuration--→Directory--→TPH Testing--→Dump Mode
Please select to Dump Mode.
STEP 2. Make sure pinter ready for print a label
STEP 3. Send a label or commands which met problem to the printer
STEP 4. Printer will print out a label with letters and numbers, please take a picture on them and send us by
email.
To cancel (get out of) the Dump Mode, please press the FEED key, and then the printer will
automatically print “OUT OF DUMP MODE.” This indicates that the printer is back to the standby mode.
To Next Page
Loading...
Need help?
General
