Godex RT800i Series User Manual

Loading Label Roll with the C Module
1. Remove the first label from the label stock.
2. Feed the Label stock through the label guides.
And pull the label liner through the platen and the steel of the label dispenser.
Note
* With Label Dispenser, the labels should be at least 25 mm high.
LABEL STOCK
LABEL LINER
THE FIRST LABEL
Tear a label
Through the label guides
Through the platen
and the steel
STEEL
PLATEN
LABEL LINER

Godex RT800i Series Specifications

General

Brand	Godex
Model	RT800i Series
Category	Barcode Reader
Language	English