Godex RT800i Series User Manual

Installing the Label Roll Module on the Printer
1. Pass the labels through the guides and the cutter.
2. Close the top cover and printing mechanism. To finish, press the FEED button to set the label position.
Note
* We advise against using inside wound label stock.
* Labels should be at least 30 mm high. When using the printer with the cutter, you should set the stop position (^E) to 30.
Through the label guides
Through the cutter
Close the top cover
Push
Press the feed
key
RELEASE CATCH
Release catch for closing
the printer cover

Godex RT800i Series Specifications

General

Brand	Godex
Model	RT800i Series
Category	Barcode Reader
Language	English