QUICKSTART
SPEAKER OUT
LAN/WI-FI
AC POWER
OTHER SOURCES
QUICKSTART GUIDE
IS-1000 is a Plug&Play source that simply requires only to be connected to the AC, the Internet and your speakers.
1 - connect IS-1000 to your speakers via the SPEAKER OUT connectors
2 - connect IS-1000 to your network via ETHERNET LAN or Wi-Fi (see page 15)
3 - connect IS-1000 to the AC using the supplied power cord
4 - connect other sources as a CD player or a turntable via XLR or RCA (see page 19)
5 - turn ON the master switch on the rear panel and then press and hold the knob for 3 seconds
6 - download the control App for iPhone, iPad and Android (see page 10)
7 - open the App [the smartphone/tablet must be connected to the same network used by IS-1000]
IMPORTANT:
please ensure the unit is OFF while handling the cables and connectors
9
To Next Page
Loading...
Need help?
General
