To Next Page

To Previous Page

MONITOR ART 7/G2+

Main menu

SOU S5110/ART 7 VIDE ENTL O DOOR RY SYSTEM KIT

If the device is in standby (screen switched off), to access the main menu, press either of the 2 hidden buttons with

indicator LEDs illuminated (located above the raised dots for the visually impaired) on the monitor. Then

press the hidden button located just below the corresponding icon. The device will return to standby mode after

30 seconds without activity.

Press the hidden button below icon to display the image from the door panels and cameras

connected to the system. Note: This enables the door panel camera to be changed, the audio on

the corresponding door panel to be activated and the door to be opened (see p. 17).

Press the hidden button below icon to access the menu of the intercom between other monitors in

the same apartment or other apartments (see pp. 20-21).

Press the hidden button below icon to display the list of images recorded in the memory of the

device. If a MicroSD card is inserted in the monitor, images/videos will be recorded on the

MicroSD card (see pp. 22-24).

Press the hidden button below icon to make changes to the system settings (see pp. 12-16).

Indicates that the inserted Micro SD card must be formatted from the monitor. Access this

function by pressing the hidden button below icon to access the Micro SD card format

menu, then press the hidden button below icon to start formatting the Micro SD card. To

return to the main menu, press the hidden button below icon . To exit without formatting,

press the hidden button below icon .

09:27

01 7 9-0 -201

There are no images/videos pending viewing.

There are images/videos pending viewing.

Hidden button

pressing area

LED indicators

Raised dots for the

visually impaired

No function.

Press the hidden button below icon to enable disable

the 'Do not disturb' function: If the monitor is in 'Do not disturb' mode, the ringtone on the

monitor does not sound when a call is received and the notification icon will illuminate.

for 3 seconds and for 1 second to

golmar G2+ User Manual

Questions and Answers: