Need help?Do you have a question about the golmar G2+ and is the answer not in the manual?
General| Wiring | 2-wire |
|---|---|
| Type | Video Intercom |
| Display | Color LCD |
| Night Vision | Yes |
| Connectivity | Wired |
Explains how the system operates when a call is received and how to establish communication.
Provides instructions for safe and proper installation of the power supply unit.
Outlines the procedure for adding and deleting user keys for the proximity reader.
Explains how to configure the monitor as master/slave and set its address.
Instructions for automatic deletion, recording modes, and memory management.
Procedures for deleting images/videos and formatting the Micro SD card.
How to activate and set a time period for automatic door opening.
Configuration for the 'do not disturb' mode and inter-apartment intercom.
Accessing system information and restoring factory settings.
Buttons for cancelling calls, changing image source, and activating lock release.
Buttons for adjusting volume, changing camera source, and lock release.
How to enter the intercom menu and start internal or external calls.
How to navigate and display saved still images from the device or SD card.
Instructions for accessing, viewing, and deleting recorded video clips.
Detailed steps for managing video recordings, including deletion and playback.
Specifies cable types and maximum distances for system installation.
How to connect a 12Vdc lock release and AC lock release with relay.
Procedure for entering codes to modify factory parameters.
To Next Page