golmar Rock Series Installation Manual

56
55
Coming from previous page
Menú 4:
Then adjust the settings as required:
- Default setting, all the advanced monitor programming options:
No function.
- Button has no function.
No function.
- Button has no function.
No function.
- Button has no function.
- Accessing "Menu 1" or exiting programming mode:
To access press button , and the programming LED will blink once"Menú 1"
(see page ).53
To exit programming mode press button for 3 seconds, and the programmin LED
will turn off.
- Accessing "Menú 3" or exiting programming mode:
To access , press button , and the programming LED will blink ." "Menu 3 3 times
To exit programming mode, press button for 3 seconds, and the programming
LED will turn off (see page ).56
Coming from previous page
To repeat the ringtone on the monitor: Each press on button selects a repeat“ ”
of the ringtones which is indicated with blinks (1 to 3 blinks) of the
programming LED and in the following order: 1, 2 or 3 repeats. When the
final selection is reached, the following press returns the user to the first
selection and 1 blink of the programming LED (carousel mode).
Menu 3:
Then adjust the settings as required:
- Repeating the ringtones: One repeat (default setting).
- Adjusting the "door panel communication time":
Activating the in-call video: Press button , and the programming LED will
indicate with 2 blinks that the video will appear on the monitor when a call is
received or with 1 blink that the video will appear at the end of the ringtone.
- Activating the in-call video: The video appears when a call is received (default setting).
No function with SV-801 SE kit video.
- Adjusting the "door panel call time":
- Accesing "Menu 4" or exiting programming mode:
To access , press button , and the programming LED will blink ." "Menu 4 4 times
To exit programming mode, press button for 3 seconds, and the programming
LED will turn off (see page ).56
When exiting advanced programming mode, the monitor will turn off: Press
button for 3 seconds to turn the monitor back on. After any resetting of the
monitor and for the following 45 seconds, no operation with it can be
performed.
- Turning on the monitor when exiting programming:
No function with SV-801 SE kit video.
MONITOR PROGRAMMING
MONITOR PROGRAMMING
Continue
Set to "default setting": Press button , and the monitor will indicate with 2
acoustic tones that all the options of the advanced programming of the
monitor (pág. 53-56) are with its default setting.
(With monitor V03 and later).

golmar Rock Series Specifications

General

Brand	golmar
Model	Rock Series
Category	Intercom System
Language	English