Problem What to do
No Power
Check the mains plug is connected to the wall socket.
Switch the wall socket ON.
Press the STANDBY button (I) to wake from Standby
mode.
No sound from the CD
No sound from an AUX input
The volume level is too low. Increase using the
volume control (E).
The volume level is too low. Increase using the
volume control.
The external audio source volume is too low,
increase the volume level.
The sound is distorted
The sound is distorted from an AUX input
Reduce the CD boombox volume level using the
volume control (E).
The external audio source volume is too high,
decrease the volume level.
Unable to play a CD Check there is a disc present in the CD
compartment.
Remove and re-insert the CD with the label side
facing upwards.
Clean the disc, it may be dirty. If scratched try
another disc.
Static sound when listening to the radio This is caused by poor reception. Re-locate the
antenna or if that fails try moving the CD boombox
to a different location.
No sound from the Bluetooth input Check the external device is paired correctly.
The external audio source volume is too low,
increase the volume level.
Troubleshooting5
To Next Page
Loading...
