Goodmans ROCKA - Features; 4.7 DAB Full Scan & Manual Tune; 4.8 System Menu

ROCKA
g.6
4.7
4.8
DAB Full Scan & Manual Tune
If Rocka is in DAB mode, press and hold the Menu/Info button to
enter the menu list. In the menu list you can set full scan, manual
tune and system.
Full Scan
Select this option to start full scan automatically.
1. Turn the dial to the <Full Scan> option.
2. Press the dial to conrm and full scan starts automatically
(g.5).
3. Once a scan is completed, the radio will play the rst station
on the station list.
if no radio station found, it shows “No DAB Station”. For a better
reception, extend the aerial or do the full scan again in another
place.
Manual Tune
Select this option to manually tune to a particular channel/
frequency. This can be useful for adjusting your aerial to achieve
the best possible reception and scanning a particular channel to
update the station list.
1. Turn the dial to the <Manual Tune> option.
2. Press the dial to conrm.
3. Turn the dial to select a particular channel/frequency (g.6).
4. Press the dial to conrm the setting.
The display shows a live indication of the received signal strength
on the selected frequency. Use this display to adjust your aerial to
the optimum signal strength.
System Menu
In both DAB and FM modes, press and hold the Menu/Info
button to enter the menu list. In the menu list you can set
backlight and language, reset to default setting, and S/W version.
Turn the dial to scroll through the selections and press to conrm.
An asterisk denotes the current setting where an adjustment is
available (g.7).
g.5
0