What to do if Goodwe GW15K-ET shows Internal Comm Loss?
If your Goodwe Inverter is experiencing an Internal Comm Loss, which can be caused by a frame format error, parity checking error, CAN bus offline, hardware CRC error, incorrect send/receive control bit, or transmission to an unauthorized unit, try disconnecting the AC output switch and DC input switch, then reconnect them after 5 minutes.
What does Anti-islanding mean on my Goodwe GW15K-ET?
If your Goodwe Inverter shows an Anti-islanding error, it indicates that the utility grid is disconnected, according to safety regulations, but the grid voltage is maintained due to the loads. Check whether the utility grid is disconnected.
How to resolve PV Input Overvoltage on Goodwe Inverter?
If your Goodwe Inverter is showing PV Input Overvoltage, it means the PV array configuration is incorrect, and too many PV panels are connected in series in the PV string. Check the serial connection of the PV array. Ensure that the open circuit voltage of the PV string is not higher than the maximum operating voltage of the inverter.
What causes PV Input Overvoltage on Goodwe GW15K-ET?
A 'PV Input Overvoltage' error on your Goodwe Inverter indicates that the PV array configuration is not correct, meaning too many PV panels are connected in series in the PV string. You should check the serial connection of the PV array to ensure that the open circuit voltage of the PV string is not higher than the maximum operating voltage of the inverter.
How to fix GFCI HCT Check abnormal on Goodwe GW15K-ET Inverter?
To address a 'GFCI HCT Check abnormal' error on your Goodwe Inverter, disconnect the AC output switch and DC input switch, then reconnect them after 5 minutes. This error indicates that the sampling of the GFCI HCT is abnormal.
How to fix low insulation resistance on Goodwe Inverter?
If the Goodwe Inverter indicates low insulation resistance, it's likely that the input insulation impedance has become low during operation. To resolve this, check the impedance between the PV string and PE to ensure it is not too low. If the problem persists, further inspection may be needed.
What does Grid Rapid Overvoltage mean on Goodwe Inverter?
If your Goodwe Inverter is showing Grid Rapid Overvoltage, it means that the grid voltage is abnormal or ultra-high. If the problem occurs occasionally, the utility grid may be temporarily abnormal. The inverter will recover automatically after detecting that the utility grid is normal. If the problem occurs frequently, check whether the grid voltage is within the allowed range and contact the local power company if it exceeds the permissible range.
Why is my Goodwe GW15K-ET Inverter showing Grid Undervoltage?
If your Goodwe Inverter is showing a Grid Undervoltage error, it might be because the grid voltage is lower than the permissible range, or the duration of low voltage exceeds the LVRT requirement. If this occurs occasionally, it could be a temporary issue with the utility grid, and the inverter should recover automatically once the grid returns to normal. If the problem occurs frequently, check whether the grid voltage is within the permissible range. Also, ensure the AC breaker and the output cables are securely and correctly connected.
What causes Grid Overfrequency on a Goodwe GW15K-ET?
If your Goodwe Inverter displays a Grid Overfrequency error, it's likely due to a utility grid exception where the actual grid frequency exceeds the local grid standard's requirements. If this occurs occasionally, it may be a temporary issue, and the inverter should recover automatically once the grid frequency returns to normal. However, if the problem happens frequently, verify that the grid frequency is within the permissible range. If it exceeds the limit, contact your local power company.
Why does my Goodwe GW15K-ET show Grid Overvoltage?
If your Goodwe Inverter is showing a Grid Overvoltage error, it could be because the grid voltage exceeds the acceptable range, or the duration of high voltage surpasses HVRT requirements. If this happens occasionally, it may be a temporary issue with the utility grid, and the inverter should automatically recover once the grid voltage returns to normal. If the problem occurs frequently, verify that the grid voltage is within the permissible range. If it's not, contact your local power company. Also, ensure the AC breaker and output cables are securely and correctly connected.
Essential safety rules for handling and operating the inverter.
Safety measures for connecting and managing photovoltaic strings.
Critical safety instructions specific to the inverter's operation.
Environmental and location criteria for inverter installation.
Step-by-step instructions for physical mounting.
Diagrams illustrating system electrical connections.
Crucial safety rules for making electrical connections.
How to connect photovoltaic strings to the inverter.
Detailed steps for connecting the battery system.
Procedures for connecting the inverter to the AC power source.
Essential checks before energizing the equipment.
Steps to safely turn on the inverter system.
Safe procedure for shutting down the inverter for maintenance.
Solutions for frequently encountered inverter faults.
To Next Page
General
