Gooxi G2DERO-B User Manual

Version: V1.2 113
Clear disk RAID information:
This function is used to clear the RAID residual information in the disk, so that the disk can be used to configure RAID
again. This function is often used for disks whose mode is Unconfigured Bad.
a) Switch the disk mode Unconfigured Bad to Unconfigured Good.
b) As shown in Figure 4-78, select Configuration Management on the RAID card configuration interface and press
Enter.
Figure 4-78
c) Enter the interface shown in Figure 4-79, select Manage Foreign Configuration, and press Enter.

Gooxi G2DERO-B Specifications

General

Brand	Gooxi
Model	G2DERO-B
Category	Motherboard
Language	English