Version: V1.2 19
2.5 Rear panel connectors
Figure 2-10
1
Reset button: BMC reset reset.
2 RJ45 Gigabit Ethernet port: The dedicated IPMI management interface provided by the motherboard supports
IPMI remote management.
3
USB ports: 2 USB ports, support USB 3.0 specification.
4 RJ45 Gigabit Ethernet port: The 2 network ports provided by the motherboard use RJ45 connectors stacked up and
down .
5
COM port: serial communication port, used to connect serial mouse and communication equipment .
6 VGA port: used to connect a monitor.
7 UID Button: The ID LED on the front/rear panel will light blue when system identification is active.