Version: V1.2 143
tested, this is an operation demonstration, not specifically described.
5.3 Other ways to connect to IPMI
The AST2500 firmware conforms to the IPMI 2.0 specification, so users can use the standard IPMI driver distributed by
the operating system.
5.3.1 IPMI driver
The AST2500 supports drivers referenced by Intel, available at:
https://www.intel.com/content/www/us/en/servers/ipmi/ipmi-technical-resources.html via Windows Server 2003 R2.
Microsoft also provides IPMI driver packages, and you can also use the Open IPMI driver in your system.
AST2500 supports the Open IPMI driver of the Linux kernel. Use the following commands to load the IPMI driver:
"modprobe ipmi_devintf" "modprobe ipmi_si". If you are using an old version of the Linux kernel, you need to replace
the "ipmi_si" component with "ipmi_kcs".
5.3.2 IPMI tools and other open source software
AST2500 supports open source IPMI tools, and you can also use other software, such as: Open IPMI, IPMI Utility,
etc.
The above documents are designed to help you quickly understand and deploy the IPMI functions of the system.
Regarding the detailed function operation manual of IPMI, we will provide other help documents.
To Previous Page
Loading...
Need help?
General
