Version: V1.2 126
BGI: Background Initialization, background initialization, first initialize part of the RAID space for writing data, and
initialize the rest of the space in the background.
FGI: Full Ground Initialization, full disk initialization, initializes all the space of the RAID, and writes data only
after the initialization is completed.
c) Enter the interface shown in Figure 4-102, select YES, and press Enter to complete the disk initialization operation.
Figure 4-102
Wipe disk data:
This function is used to delete the internal data of the disk, including erasing physical disk data and logical disk data.
1. Erase physical disk data
a) As shown in Figure 4-103, select the physical disk to be erased on the PD Mgmt interface and press F2.
To Next Page
Loading...
Need help?
General
