Gooxi G2DERO-B User Manual

Version: V1.2 130
Clear disk RAID information:
This function is used to clear the RAID residual information in the disk, so that the disk can be used to configure RAID
again. This function is often used for disks whose mode is Unconfigured Bad.
a) Switch the disk mode Unconfigured Bad to Unconfigured Good.
b) As shown in Figure 4-109, on the Foreign View interface, select the RAID card, press F2, select Foreign
Config->Clear, and press Enter.
Figure 4-109
c) In the displayed dialog box shown in Figure 4-110, select OK and press Enter to complete clearing disk RAID
information.

Gooxi G2DERO-B Specifications

General

Brand	Gooxi
Model	G2DERO-B
Category	Motherboard
Language	English